Green DB30 Baja Racer w/212cc

#1
Hi all... looks like I have found project #2. It's a Baja Racer (DB30) that I'm going to put a 212cc Predator on. This is a DB30-S, right? Here are some photos:

12993595_10154082656274378_3293116120183075333_n.jpg
13000108_10154082652094378_1114895748349245829_n.jpg
13043239_10154082652109378_6519811246491237487_n.jpg

Obviously, I have not worked with this frame or engine before, so any advice you all have will be HUGELY helpful. Here goes nothing! :hammer:
 
Last edited:
#3
Make sure you get the hemi version of the 212 if they have them, 60363 is the part number you want, my doodle with a stock 212 is enough to scare most adults.
 
Last edited:
#7
Well I've taken her apart and painted, and set the 212cc in there on the OldMiniBikes-procured motor mount. Had to remove the gas tank of the Predator to get the motor in. Will probably make a gas tank and attach it to the handlebars near the fork neck.

13001122_10154082846689378_6327365573946316062_n.jpg
13100832_10154091669659378_7409922561905533426_n.jpg
13077067_10154099489039378_4335611669637094501_n.jpg
 
#9
Does anyone know if the oil that comes inside the Predator 212cc out of the box is good to run right away, or am I supposed to change it?
 
#13
If it was me I would drain it and put in some new oil.
Roger that. I drained the teesny bit of factory oil in there (DEF not enough to run on), and put new oil and gas in, and it started up first pull. Gonna get the front wheel on and throttle reassembled and twist it. Video soon!
 
#15
13164426_10154127680794378_1394293379067108375_n.jpg
13091928_10154127680774378_8312373467590669246_n.jpg

Testing and tuning. It's pretty dang fast, but I think I might consider a stage kit for more speed! Gotta love working at a Harley Dealership with lifts and compressors.
 
Last edited:
Top