H50 mini bike linkage question

#1
Just got this lighted h50 with the mini bike throttle setup but it's missing the linkage rods. Where can I find these and which ones do I need. Thanks. IMG_2628.JPG
 
#3
A little help...

Hmm, not sure. Here are some pics--not great ones. There is one rod that travels from the throttle control to the governor (low side) and one from governor to carb (high side). There is a spring on the throttle, too. These are impossible to find. Joe51 has made these assemblies and might have extra rods.
 

Attachments

#9
Think his name is Brendan and I've talked to him on the phone a few times in the past when I was building my bandit and never had a problem
 

125ccCrazy

Well-Known Member
#12
if you have a hobby store close that deals with rc planes they should carry small steel rods and Z bend pliers..I made my own rods for a few engines..I also made my own return spring that goes around the one arm.. For the long rod that goes side to side I used an old metal coat hanger since they are thicker and fit the holes in the arms tighter..
 
Top