H60 or H70 Tecumseh

CLH

CLH

Member
#1
#1
Looking for a Tecumseh H60 or H70 engine. (or any 6/7hp Tecumseh model variant) Needs 1" shaft, at least 2 3/4" inches long with 1/4 inch keyway.

Any era, any condition as long as its complete or near complete.

Going onto a early 60's Tote Gote Nova 670.

Thanks

005_zps51ed8f4d.jpg
 
Last edited:
Davis

Davis

Well-Known Member
#2
#2
If that is an original motor to the bike and you have the original clutch you need a 3/4 shaft on the motor.
 
CLH

CLH

Member
#3
#3
Davis said:
If that is an original motor to the bike and you have the original clutch you need a 3/4 shaft on the motor.
Click to expand...

The clutch I have came off of a 780 so it is one inch diamter. It is a original Bonham clutch though, and I would like to integrate it into the build of this bike.
 
B

benelli 65

Member
#5
#5
I have a h60. 1974 I believe. Complete. Geat spark / compression .needs a carburetor. If your interested, I can send some pics tomorrow afternoon.
Tom
 
You must log in or register to reply here.
Top