Decided to go from a shoe clutch to a torque converter so up for sale is a lightly used Hilliard inferno flame clutch. Asking $65 shipped with 11t/13t driver, and all necessary hardware to install including clutch bolt with lock washer.
The black springs that are currently installed in the clutch need to be replaced. (3800 rpm with 4 black springs installed”.
Also including 4 new unused white springs which has a lower rpm engagement then the black ones.
Attached are some pictures, and if you have any questions feel free to contact via PM on the forums!
The black springs that are currently installed in the clutch need to be replaced. (3800 rpm with 4 black springs installed”.
Also including 4 new unused white springs which has a lower rpm engagement then the black ones.
Attached are some pictures, and if you have any questions feel free to contact via PM on the forums!