I was not satisfied with the exhaust I had on my new build, a genuine briggs can muffler.
Still loud, and leaked out the seam everywhere. Paint lasted less than 20min.
So, I built this thing. Much thicker steel, I used a piece of 3in EMT, and whatever scrap I had in the garage.
Simple in design, flows nice. Does not restrict the motor at 6,000 rpm , and quiet as stock. Running 12.7 to 1 compression ratio.
Plus it has a nice, deep, pleasant tone. Ordered some exhaust wrap to cover it, lil bit warm.
Maybe this will inspire others, thanks for reading
Still loud, and leaked out the seam everywhere. Paint lasted less than 20min.
So, I built this thing. Much thicker steel, I used a piece of 3in EMT, and whatever scrap I had in the garage.
Simple in design, flows nice. Does not restrict the motor at 6,000 rpm , and quiet as stock. Running 12.7 to 1 compression ratio.
Plus it has a nice, deep, pleasant tone. Ordered some exhaust wrap to cover it, lil bit warm.
Maybe this will inspire others, thanks for reading