Ok so I’ve had a stage 2 kit installed on my gx200 clone and it’s been running fine as it gets. I recently removed the governor and now I’m encountering multiple issues. I lined the camshaft when I was done and readjusted my valve lash. Now when I start my bike, it idles alright (a little faster with choke open) but it hesitates to accelerate and dies with the throttle open. It also blows some white smoke and pops sometimes. I took the spark plug out and the spark and piston were soaked in gas. I’m working with a brand new carb and such and my bike was just running great before the governor removal so I’m not really sure where to go from here. Vacuum leak? Head gasket?