idle speed / too low / need more gas - help

[mauiandcali]

Hi all
first sorry if this is a repeat i searched;

problem: I have a jiangdong JF168 - its starting and idling fine -- however its only starting to enguage the clutch with the throttle (handle) half way on -
I see the screws and have adjusted them but the air filter is blocking the (rabbit - turtle) handle from going all the way to rabbit

im sure that 100s of you guys have dealt with this - this is a very nice motor but i just dont have it adjusted yet

Mike

 

[balljoint]

Hi all
first sorry if this is a repeat i searched;

problem: I have a jiangdong JF168 - its starting and idling fine -- however its only starting to enguage the clutch with the throttle (handle) half way on -
I see the screws and have adjusted them but the air filter is blocking the (rabbit - turtle) handle from going all the way to rabbit

im sure that 100s of you guys have dealt with this - this is a very nice motor but i just dont have it adjusted yet

Mike

Pull the air filter assembly off so you can see what your doing,then look at it,then you can make your cable adjustments as needed:grind: