The springs are actually about an inch longer than original, but I still think there's room on the inner pipes. If you think not, please let me know.
Here's the tubes...
,
Here's the springs I plan to use. The left side is attached. The right side is not. In total I think there's still about 3 inches of overlap fully extended. If the springs are too long, in the worst cast I can cut them down. Appreciate your thoughts.
Here's the tubes...
,
Here's the springs I plan to use. The left side is attached. The right side is not. In total I think there's still about 3 inches of overlap fully extended. If the springs are too long, in the worst cast I can cut them down. Appreciate your thoughts.
Last edited: