You are looking at an El Burro minibike. It was made in Michigan, I assume back in the 70's. I got it from the son of the original owner at Thanksgiving time. It had an 8 HP Briggs engine that had been converted to rope start and that seemed a little tired. I removed that and installed a very fresh Industrial/Commercial electric start Briggs and Stratton 8 HP. I installed a new clutch and band brake. I added a solenoid, a push to start button on the handlebar, a battery, a kill swtich, a headlight and best of all, a new beautiful seat. It has 4 inch foam. I wrapped the exhaust system with header wrap for heat control. I put a new tube into the front tire. I purchased a new carburetor for $110.00 and installed it. Now it starts easily and idles smoothly. This is an unusual minibike in that it is quite large and is set up with two sets of foot pegs. I put new bike hand grips onto the rear pegs. You and a friend can go for a ride on this generous size machine. The frame is solid and the tires are very lightly worn.This is in overall great condition. It is a blast to ride. The price is $1200.00. I live in Ypsilanti, MI. My cell is: 248-890-7226. Cash works well. Thank you for your interest.
