Manco brake drum

[thejoker]

I'm still looking for a man Co brake drum in good condition preferably on the cheap side

 

[thejoker]

Bump

 

[thejoker]

Bump

 

[CarPlayLB]

Do you know what size you need? What is this going on? Mini bike or go kart? Can you post a pic of the hub or wheel? Help us help you!

 

[thejoker]

It's going on a manco delta one chopper. I believe it is supposed to be a 4 inch 3 hole drum going on a inch manco wheel

 

[thejoker]

6 inch manco wheel

 

[Mac]

Can you use the style like eBay item number: 221368022153
I think it's a 4 1/4" brake.
Pretty sure it fits the Manco. & Cheeftah, and with a little work a Kidney Bean.

 

[thejoker]

I'm not sure. It's the same one that'son the star's and stripes if that's any help

 

[thejoker]

Bump

 

[thejoker]

Bump

 

[thejoker]

Bumping

 

[Mean Dean]

You might want to try Allied Leisure 248 477 0212. or Try Motor City Mini's. 313 948 4844

 

[thejoker]

Thanks i was going to try and get a blank one and drill it my self

 

[thejoker]

Bump looked for one with out pre drilled holes but no luck hopefully some one has one the can part with thanks

 

[FloridaMiniBikes]

I used a sprocket/drum and brake assembly from Northern tool, but thats on a 5 inch manco wheel that I have posted for sale on OldMiniBikes right now. Not sure if it will work on your 6 inch wheel though?

 

[thejoker]

I have one on the wheel like that already the 5 and 6 in wheels use the same size but i need a drum without the flanges for the other side for my restoration

 

[Mac]

I have one on the wheel like that already the 5 and 6 in wheels use the same size but i need a drum without the flanges for the other side for my restoration

Maybe you can trim the flange off a flanged drum.



Below is a picture of two styles I have for future projects
that someone may recognize:

3/4" shoe surface on left, 1" surface to the right.

 

[george3]

Maybe you can trim the flange off a flanged drum.



Below is a picture of two styles I have for future projects
that someone may recognize:

3/4" shoe surface on left, 1" surface to the right.

They look like internal drums. Is that a 4 1/2 and a 5"? Dosent Manco use a band brake on the rear drum, Like Trail Horse?

 

[thejoker]

Maybe you can trim the flange off a flanged drum.



Below is a picture of two styles I have for future projects
that someone may recognize:

3/4" shoe surface on left, 1" surface to the right.

I thought about that also I just don't have the equipment to do it

 

[thejoker]

http://www.oldminibikes.com/forum/strictly-us-vintage/53278-manco-delta-1-chopper.html

this is virtually the same exact bike I need the same band brake set up as the star's and stripes bike in this thread