mikuni carb ID

delray

delray

Well-Known Member
#1
#1
Pick up this mikuni carb that i want to run a clone engine,but i am not sure what type i have. I thought it just had the small brass hex main jets. After taking the bowl off i notes it has a large style jet with tube and o-ring. What type is this and where can i find that type of jet. Right now it has a 95 stamp on it,but the jet hole looks bigger then a 130 small brass jet?
Any help would be great....thanks

//s206.photobucket.com/user/468delray/media/Mobile%20Uploads/20150527_135943.jpg.html]
[/URL]
 
David wulf

David wulf

#3
#3
Delray first thing is to separate the jet from the tube , long thing with the O ring . The so called 22mm jets can very in appearance , I have two type that fit in the carb .
What type of mods are done to your clone ? A clone needs to be pretty hot to take one of these carbs . If it's not really modded might try smaller jets and dropping the needle some . If yea got more ??? Just PM me .
 
delray

delray

Well-Known Member
#5
#5
make a story real short, i had some hex style jets and never had this style carb before with round headed jets........:facepalm:





case close.........:laugh:
 
You must log in or register to reply here.
Top