I'm selling off some parts that are laying around my garage doing nothing. This is a "All-or-Nothing" sale. Just one price for all the parts. I don't have the time to sell off individually.
Everything for $60 which includes shipping to the lower 48 states. Payment by Pay-Pal. I'll answer PM's in the order received. I can only check my inbox twice-a-day
Vintage Gas Tank: It's 8 1/2" long and 3" in diameter. Has some light surface rust on the outside and a few small dings on the end. It's in pretty good condition on the inside because it was from a 2 cycle gas/oil mix engine and I think the oil protected it pretty well. A solid little tank that just needs sanded and painted! Could use a new cap.
A/C Drier Gas Tank: It's 12 1/2" long and 3 1/2" in diameter. This aluminum gas tank was made from a gutted AC Drier tank from a Chevy S-10 pup. Kinda crude but would look cool on a rat bike.
Vintage Air Cleaner Assembly: It's 3 1/2" tall and 2 1/2" wide. It has a 7/8 opening on the carb base. Aluminum and louvered. "Protectomotor" brand!
Folding Foot Pegs: These are 4 9/16" long (not counting the stud) or 6" long (counting the stud). New in box. Made in Japan.
Max-Torque Clutch: This 12T clutch has a 3/4" bore with "no set-screws". Condition of this clutch is unknown but I believe it could be new.?. Teeth look excellent and possibly never mounted.?. Has some surface rust/imperfections from kicking around. This came with a crate of mini/gokart parts that i purchased from a previous owner.
2 Jackshaft Sprockets: I have two jackshaft sprockets (18T and 12T). Both have 5/8" bores. The 12T is new. The 18T was used for just a couple of miles until it was switched out to adjust ratio. Plus a couple of 3/16" keys.
3 Masterlinks: Three new masterlinks for #35 chains.
PowerProducts Rope Spool: A aluminum rope spool for a vintage powerproducts engine.
Everything for $60 which includes shipping to the lower 48 states. Payment by Pay-Pal. I'll answer PM's in the order received. I can only check my inbox twice-a-day
Vintage Gas Tank: It's 8 1/2" long and 3" in diameter. Has some light surface rust on the outside and a few small dings on the end. It's in pretty good condition on the inside because it was from a 2 cycle gas/oil mix engine and I think the oil protected it pretty well. A solid little tank that just needs sanded and painted! Could use a new cap.
A/C Drier Gas Tank: It's 12 1/2" long and 3 1/2" in diameter. This aluminum gas tank was made from a gutted AC Drier tank from a Chevy S-10 pup. Kinda crude but would look cool on a rat bike.
Vintage Air Cleaner Assembly: It's 3 1/2" tall and 2 1/2" wide. It has a 7/8 opening on the carb base. Aluminum and louvered. "Protectomotor" brand!
Folding Foot Pegs: These are 4 9/16" long (not counting the stud) or 6" long (counting the stud). New in box. Made in Japan.
Max-Torque Clutch: This 12T clutch has a 3/4" bore with "no set-screws". Condition of this clutch is unknown but I believe it could be new.?. Teeth look excellent and possibly never mounted.?. Has some surface rust/imperfections from kicking around. This came with a crate of mini/gokart parts that i purchased from a previous owner.
2 Jackshaft Sprockets: I have two jackshaft sprockets (18T and 12T). Both have 5/8" bores. The 12T is new. The 18T was used for just a couple of miles until it was switched out to adjust ratio. Plus a couple of 3/16" keys.
3 Masterlinks: Three new masterlinks for #35 chains.
PowerProducts Rope Spool: A aluminum rope spool for a vintage powerproducts engine.