I just put a 30 series TC on my CT200U And I also put a 60t rear sprocket on it. It really seems that the torque converter is climbing too fast because now even going down a blacktop road it will not go fast enough to hit the governor anymore and now it only goes about less than 30 miles an hour top speed. It has gobs of power down low so I don’t want to put a smaller rear sprocket on it.
Are there any good threads on tuning torque converter’s?
I’d like it to climb slower on the top end but I like the engagement off of idle.
Are there any good threads on tuning torque converter’s?
I’d like it to climb slower on the top end but I like the engagement off of idle.