Motovox spacer help

[Valocalrep]

Have a friend who picked up a MBX10 last week the rear wheel is missing the axel, bearings and all 3 spacers. Can anyone tell me the spacer spec so he can cut some up?

 

[Sixpac440]

Im working on my granddaughters MBX11 .... it has 2 spacers, the right one is slightly longer than the left ... it you still want the sizes PM me while I still have the bike here.

 

[Newoldstock]

You can use washers to shim as required.

 

[Valocalrep]

Incase anyone else needs it Sixpac440 helped me out
Sprocket side is 24.00mm or .945"

Brake side is 28.00mm or 1.100"

I.D. is 12.20mm or .480"

wall thickness is 3mm or .120"

 

[Valocalrep]

Gotta bring it back from the dead my bad guys, My buddy needs a rear axle for a motovox MBX10 yes i know it can be ordered from their site but not ok with paying 12 for shipping the axle. Anyone have any leads on one?

 

[minikenny]

It appears to be a 12mm bolt. Head down to Fastenal and get one. :thumbsup:

https://www.fastenal.com/products/details/39198

 

[Valocalrep]

Kenny we didnt see one long enough on there

 

[minikenny]

I thought the length was 260mm. Did you click the link?

 

[Valocalrep]

It didnt let me click it on my phone but it let me do it on the computer thats a sweet deal ill have to show him thanks

 

[minikenny]

No problem. Hope it works out for you. :thumbsup: