Here's the little Cheeftah MB1000 I got from Jay Bell. The steering head had been ripped from the frame, and a bracket added to reattach. The forks were bent and twisted. I removed the front end, repaired the tubes, made a new steering head and welded it on. The little spring cleaned up nicely, and I got 99% 0f the twist/bends out of the forks. I put a temp set of wheels on it to roll it around til I get time to blast and paint the originals. Not bad work for a hacker, eh?? I have a Clinton engine for it. Should come out OK.
Last edited: