Hello all. I am trying to figure out what model B&S motor this is. I went online to get a carb kit and realized this is different than the ones that the search engine came up with.
I was able to get a Carb kit and even a NOS carb from a guy in Utah who stated they were used for generators for the military.
My question to the group is can anyone give me an idea if this is a 2HP or 3HP and where I can find any ID numbers. I carefully cleaned and media blasted the cover and as you can see in the photos there are no tags or stampings.
What I do know is the shaft is 5/8 Non Keyed and has fine thread on the end. The rest is assumed this is a 2 or 3 HP B&S
I have an additional 3HP ( white one ) that I was trying to go off of.
I appreciate any info on this.
I was able to get a Carb kit and even a NOS carb from a guy in Utah who stated they were used for generators for the military.
My question to the group is can anyone give me an idea if this is a 2HP or 3HP and where I can find any ID numbers. I carefully cleaned and media blasted the cover and as you can see in the photos there are no tags or stampings.
What I do know is the shaft is 5/8 Non Keyed and has fine thread on the end. The rest is assumed this is a 2 or 3 HP B&S
I have an additional 3HP ( white one ) that I was trying to go off of.
I appreciate any info on this.
Attachments
-
9.3 MB Views: 33
-
6.8 MB Views: 34
-
1.7 MB Views: 30
-
9.7 MB Views: 27
-
9.1 MB Views: 21
-
2.1 MB Views: 20
-
1.7 MB Views: 20
-
1.8 MB Views: 21
-
1.9 MB Views: 21
-
1.8 MB Views: 28
-
1.7 MB Views: 31