OHV Open, and Modified Parts For sale

[minidragbike]

Fresh, Never bolted on
Big Valve Small Chamber GX200/Clone Head.
31mm intake, 27mm exhaust $250 (Mega Flow!!!)

New, Still in route to my house.
1.2 Ratio Hunter Roller Rocker for the GX200/Clone $150

Lightly used, but fresh
Ital Sistem billet carb, same as a Ibea butterfly gas carb. 1" bore with a .790" venturi, was used on a lightly modified gx200/Clone $100

Used, alky Tillotson carb
HL348C was used on a modified gx200/Clone $75

New, Isky Cam For open gx200/Clone
.315" lift 260 degrees @ 0.050" lift, Great for long rod, or big bore, or stroker. $120

Used, ARC billet finned flywheel gx200/Clone $85 shipped

New, Still in the box
ARC stock length billet gx200/Clone rod, and gx160 flat top Honda piston. $75 shipped for both.

Used, good condition
Clements Briggs Animal 1.25 ratio roller rockers $150

I will try to get pictures tomorrow.

 

[minidragbike]

Billet rod, and Flat top piston sold.

Here are the pictures on the parts:

Also I have a Faster Motors Animal/WF block girdle.
http://i88.photobucket.com/albums/k...bike/Sale10.jpg

Clements 1.25 ratio Roller Rockers
http://i88.photobucket.com/albums/k...bike/Sale08.jpg
http://i88.photobucket.com/albums/k...bike/Sale09.jpg

ARC gx200/Clone flywheel
http://i88.photobucket.com/albums/k...bike/Sale01.jpg

Ital Sistem billet carb
http://i88.photobucket.com/albums/k...bike/Sale03.jpg
http://i88.photobucket.com/albums/k...bike/Sale04.jpg
http://i88.photobucket.com/albums/k...bike/Sale05.jpg

Tillotson alky HL348C carb
http://i88.photobucket.com/albums/k...bike/Sale02.jpg

Isky .315" lift 260 duration cam for open gx200/Clone
http://i88.photobucket.com/albums/k...bike/Sale06.jpg
http://i88.photobucket.com/albums/k...bike/Sale07.jpg

Big Valve gx200/Clone head
http://i88.photobucket.com/albums/k...bike/Sale17.jpg
http://i88.photobucket.com/albums/k...bike/Sale16.jpg
http://i88.photobucket.com/albums/k...bike/Sale14.jpg
http://i88.photobucket.com/albums/k...bike/Sale13.jpg
http://i88.photobucket.com/albums/k...bike/Sale12.jpg
http://i88.photobucket.com/albums/k...bike/Sale11.jpg

I do take paypal
Also still haven't got in the 1.2 Hunter roller rockers for the gx200/Clone. But should have them this week.

 

[~JM~]

Pictures no worky. ut:

 

[minidragbike]

Ok let's try this again!

Faster Motors Animal Girdle

Clements 1.25 ratio Roller Rockers

ARC gx200/Clone flywheel

Ital Sistem billet carb

Tillotson alky HL348C carb

Isky .315" lift 260 duration cam for open gx200/Clone

Big Valve gx200/Clone head

I do take paypal
Also still haven't got in the 1.2 Hunter roller rockers for the gx200/Clone. But should have them this week.

 

[minidragbike]

The New Hunter 1.2 Rollers have been refunded, Thanks Russ

 

[minidragbike]

Isky Cam
ARC Flywheel
Big Valve Head

The 3 items above are sold

I still have the girdle, Animal roller rockers, and carbs

 

[minidragbike]

Isky Cam
ARC Flywheel
Big Valve Head

The 3 items above are sold

These items are back up for sale, the buyer had personal problems.

 

[olajoe808]

These items are back up for sale, the buyer had personal problems.

PM SENT for the head.

 

[minidragbike]

PM SENT for the head.

PM replyied to
Great deal if anyone is plaining on buying these parts for a higher price for less performance.

 

[olajoe808]

PM replyied to
Great deal if anyone is plaining on buying these parts for a higher price for less performance.

not sure if you got my pm, would like to move forward with this. Awaiting payment instruction.

Thank you.

 

[minidragbike]

not sure if you got my pm, would like to move forward with this. Awaiting payment instruction.

Thank you.

Yeah got your PM, and sent the info, Thanks

 

[minidragbike]

Head is sold, other parts still availble

 

[minidragbike]

Rod and piston sold, Thanks
Other parts are still for sale

 

[minidragbike]

These are the only parts I have left

Used, good condition
Clements Briggs Animal 1.25 ratio roller rockers $150

Used, alky Tillotson carb
HL348C was used on a modified gx200/Clone $75

Used, ARC billet finned flywheel gx200/Clone $85 shipped

 

[Modding_out]

What the heck man....I thought you told me you didn't have any gx200 rods:hammer:

 

[minidragbike]

What the heck man....I thought you told me you didn't have any gx200 rods:hammer:

I didn't, a guy traded these parts to me, plus money to buy my Pro Stock motor.

Clements 1.25 ratio roller rockers sold

 

[tlizard2]

MDB, I'm interested in the Flywheel if you still have it.

 

[Modding_out]

I didn't, a guy traded these parts to me, plus money to buy my Pro Stock motor.

Clements 1.25 ratio roller rockers sold

ok, sorry about that. my bad:doah:

If you get any more, could you let me know?

 

[minidragbike]

ok, sorry about that. my bad:doah:

If you get any more, could you let me know?

I let everyone know. I had about 6-7 guys asking me the same stuff you was asking on this site and another. Plus the local guys.

Yes I still have the flywheel, the guy didn't show up, and it's first come first served.

 

[Modding_out]

haha, I guess your a popular guy