I'm finishing this bike this weekend, got some trail 70 fenders that I'm planning to use on it. They are beat up but they are chrome, free, and they fit the contour of the tires. I have the controls mounted and a big 30 amp chrome toggle for a kill switch, the Predator is in place but the throttle has yet to be hooked up. I need to install the chains too. Bout done and it's going to be a ruffian but I like the overall look. Gonna use cap nuts atop 1/4 20 bolts to fill the extra fender holes. I will ride it while I look for some 6" Manco wheels with the proper spacer and a good sprocket or Astros if I can get a good sprocket for them, I'll do a band brake then and put the Azusalites on a yard kart that doesn't need perfect wheels. I'm hating the wheels and brakes but it's what I have. I have yet to spend a cent past the $40 Kenny special which I'm also hating. The seat is fine, just not on this bike. I'm having a big ass tuck and roll seat made for it by my boat seat guy when I can get with him on the particulars. I'm not doing any more minibikes for a while after this, gonna enjoy the summer with my kids and load the DBs for a few trips to the lake. I'll take this bad boy too to test it in the sand and the hills with the tall traction tires. :thumbsup: