Let my wife's nephew ride a couple of weeks and despite telling him not to gun it and take off easy he wheelied my stage 3 Predator 212cc Resto-mod Rupp over. I used a block and tackle with a hand winch to bend down the pan into place now when I am trying to put it together the license plate bracket and fender position seems to be out of alignment at least a quarter of an inch. Really pisses me off and I am putting an 11 tooth Rupp jackshaft sprocket on the front inplace of the stock 10 tooth to try and soften the acceleration which will throw you if you crack the throttle too much on take off. There is about 6 and 1/2 inches after the shock mount cross bar and it appears in addition to bending it upward he also pushed it over towards the left. Ideas to fix are screw gun a big block of wood to the back of the seat pan and use my 4lb sledgehammer AKA persuader to tap it over just over a quarter inch. Any other ideas?