I all most have this rupp running like new. I think today is the first time I figured out how a torque converter works. Some youtube videos. :laugh::laugh: The problem I am having is that the belt is not "slipping" on the back sprocket. The belt kinda gets stuck.ut: There is plenty of slack in the belt and the torque converter is clean and smooth. All original stuff and never been taken a part. Its all most like I need to put some WD40 in there. Would belt dressing help?ut: Its hard to push the bike and as soon as you start the engine, "your off":laugh::laugh: Good thing I got the brakes working:thumbsup: Any help would be appreciated. Thanks