stamped 1.3 rockers?????????????? help!!!!

[K42karting]

i have a stock valve train on my 6.5 clone i want to put 1.3 stamped rockers with 18 pound springs what do i have to do to make them work? i have searched i still dont understand them :helpsmilie: an i going to have to :grind:

 

[minidragbike]

You have to modify the guide plate for clearance.

 

[r_chez_08]

If your guide plate looks like this you should be fine. I have seen a few clone heads with these stock.

If it looks like this you need to modify it or get either a Honda plate or one of the CNC ones that places like NR sell.

Here is the CNC one

 

[K42karting]

is that it?

 

[r_chez_08]

What do you mean?

If your plate looks like the middle pic, then grind it to more like the first or last pic. Yep thats it.

 

[chrisbski1968]

Plate

I've got that type CNC billet plate on my motor and it works just fine, no worries

 

[K42karting]

i mean ive heard u have to cut the bolts down?

 

[Caseyslowgto]

i mean ive heard u have to cut the bolts down?

Negative ghost rider. No cutting get the right guide plate and bolt on.:thumbsup:

 

[K42karting]

thanks
:thumbsup: