A buddy of mine was throwing out this old electric minibike carcass and I thought I would play with it until I come across a vintage frame. I took off the clip on bars with all the switches and junk levers. I cut the center tubes out and jacked up the top tubes to make room for a real engine. I'm leaning towards my GX120 Honda for power but I can use any number of other engines in my shed. I have a Kohler K91, Clinton 4hp, a Briggs 5hp, a Kohler 8hp, a Robin 8hp, and a couiple of Briggs 8hp to choose from. Probably stick with the Honda. I don't think this roller is worthy of a vintage or high hp engine. I have a comet drive setup, regular handlebars with risers, #41 chain and some sprockets. May use some mopes shocks. I'll post progress if I make any.