Build day 4 is done. Turns out my original wheel base length measurment was wrong:scared: So I now have to splice in another 5 inches into the already "finished" back bone tubes. So here is what I accomplished today....
1. Cut and weld the back bone tubes to the steering stem.
Your build is just great , love the fab work going on here . On your bender where did you get the return spring from ? I have the same cyclinder on mine and need a return spring .
Your build is just great , love the fab work going on here . On your bender where did you get the return spring from ? I have the same cyclinder on mine and need a return spring .
Today I got the handle bars located and mounted. I also got the Engine mostly installed.
To install the handle bars, I was given some old mini bike triple tree top clamps that had removable handle bar clamps, they came from Ratbike228, a member here on OldMiniBikes. I just had to locate and drill holes in my top triple clamp.
The motor required alot of shimming and aligning, but once I had it where I wanted it, I used some flat stock and made brackets to secure it to the frame. I am also using some of the donor bikes frame to help speed up the fab time on the mounts.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.