Vintage Super bronc....

#4
Well not a whole lot of progress yet...work does have a way of screwing up the best laid plans....but with that said I did get a jackshaft made....not perfect but it’ll do.... 274DF25C-AAF6-4BC8-8FD8-F17107C5F921.jpeg
 
#6
Ok we got a little accomplished today....man this thing is in poor shape...front end was rusted together...and full of water...but if it was easy as they say.,.. C851F648-1878-4A0F-8B7D-1F2DB3600EAA.jpeg E4D4F96E-695A-4578-BCBD-636B6996CA99.jpeg 412DC79D-F254-40D6-9B6D-DCD002800618.jpeg
 
#7
Well a decent weekend in the garage....got the throttle and linkage figured out....ready now to start/run and finish paint....received parts from mr chatten....got some sand blasting done....going to try my hand at a seat....the lower legs will be the biggest challenge....it appears I’ll need to attempt to make some....picked up some tubing and will have to turn out a piece of one inch for the axle....we’ll see...I will have some extra parts for those in need...I’ll try to post picks later this evening.... 10C58D58-E03A-4449-A025-4ED7C6A9D7E8.jpeg 37123C31-1315-4285-8DCA-564035C8570A.jpeg CDA5D36C-9838-4284-884A-5BEE9F7FD3E5.jpeg CD4D6B62-EA1D-4C13-BB60-ABFC00B49C01.jpeg 07677921-B5E9-4F1C-9760-FC1F118D29DB.jpeg CB58DBF5-401A-4A96-89A6-6845A60C61AE.jpeg
 

Attachments

#12
Thanks! No I must admit I tried....and failed miserably.....that was finished by a local guy in one evening....I have more in the damn foam than it cost to have him sew it up....
 
#19
Thanks...I tried to cut old ones off...failed miserably...so yes they were but not by me...Jeff Lewis a gentleman at work is a master on a lathe....he was kind enough to help me out....he has turned out all the axle/wheel spacers on a trail horse project I did too....
 
Top