Hey my name is Matt and I’m new to this forum. I have had this engine that was from an old ice auger for a long time and now I want to use it for a mini bike build. I just replaced all the seals and rebuilt the carb and have it running perfect. I just have never used an engine like this before and could use any advice on gearing or anything else that mite be helpful. the tag off the engine says 670-05f. Tecumseh 6357. It was off an old jiffy ice auger. I have the gear box from it too that I was thinking I could use to gear it down. Plus the carb would be sitting sideways not sure if that will be a problem.
Attachments
-
1.8 MB Views: 66
-
3 MB Views: 66
-
3.5 MB Views: 58