broken cheeto
well, it looks like i'm not going to be able to make the deadline for the build off. I began assembly today and noticed the swing arm wouldn't fit right between the frame tabs... so I pulled pulled the frame kinda like a wishbone to see if there was any flexibility to slide the swing arm in and it flexed just enough to present a crack out from under the new paint job...about 1 inch on the motor plate that did not see before..the crack may be pulling the frame inward preventing the swing arm from fitting thru the tabs properly... oh well, i will get it welded up and finish it when I can... sucks though, but I look at it like this...at least I didn't spend $200-300 bucks on powder or paint. The cheeto will rise again. jim:thumbsup: