three hole sprocket

[bobbb]

WTB three hole mount 2 3/8" center to center- 60 tooth -35 chain rear sprocket for 4" wheel. Any out there?

 

[MCF2891]

Can u post a pic

 

[MCF2891]

Of what u have in mind

 

[bobbb]

I wish I could, but since I don't have one that's not an option. It would just be a regular old style 3 mounting hole sprocket. 7 1/4" diameter - 60 tooth- 35 chain- 1 3/8" bearing hole- mount holes 2 3/8" apart center to center. to fit a 3 spoke 4" mag wheel for my lil indian. In the 60's these were all over the place. I'm surprised it's so hard to find one. Thats about the best I can do.

 

[manchester1]

OldMiniBikes has some defective ones. You can file the teeth a bit so it will work:thumbsup:

 

[manchester1]

Defective 60T Sprocket 35 Lil Indian Ruttman 4" Wheel Mini Bike Parts | eBay
Never mind, has 4 holes.

 

[Mac]

Is the rim like the 4" rim on the far right here?:

 

[bobbb]

As best as I can tell, yes.

 

[hotrodricky]

I have a few 72 tooth 35 chain 1 3/8 bearing center hole with stainless spacers that will fit the 5 & 6 in tri star wheels. After my photo is processed I'll post a photo. 15

 

[hotrodricky]

 

[bobbb]

Hey, thanks for your efforts I appreciate it. wanting to stick with a 60 tooth I ordered another blank from OldMiniBikes and this time the center hole was centered and my too loose to too tight chain problem is cured! I now know the first one was defective. Thanks again for your help.