The mail man brought me a Max Torque SS clutch today so I made some progress on my mini bike project. My question is how in the world do I hook a twist throttle up to this style Briggs & Stratton engine.
Thanks OND, I've got that kit. My question is how you get around the slide throttle & choke assembly that's already there. Seems like a bunch of that stuff has gotta go!
This is one I made a few years ago out of a predator throttle kit and a briggs 5hp govenor linkage arm drilled out a bit. You could probably buy everything you need for this at the hardware store instead of using the parts I did. I did eventually put a return spring from the center piece around the bottom to a bolt in the empty hole near the idle adjustment. I think I might have had to drill and tap the boss that it pivots on. Also the piece that pinches the cable is the extra one that comes on a stock predator linkage, it has a snap ring on the back so it can swivel. This should be the same type carb you have.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.