Tote goat throttle

[clutchkiller2011]

I'm looking for a internal twist throttle for my tote goat need the sleeve and the cable. Anything helps. Thanks.

 

[Richard Trotter]

You will probably need all three internal parts. The cable is generic. The cable is threaded through the throttle parts and handlebar before the casing is added...

 

[clutchkiller2011]

You will probably need all three internal parts. The cable is generic. The cable is threaded through the throttle parts and handlebar before the casing is added...

I have 2 gotes one has the throttle and the other one doesn't have it and need a second one for my other bike I ride all the time.

 

[Richard Trotter]

Some of the later models didn't use the internal throttle, just an aftermarket substitute.

 

[clutchkiller2011]

Mine has the smaller bar in it with the slot. I've used a regular 7/8 grip but it won't stop moving after a while. Where my other goat has the internal and is a way smoother action on the throttle.

 

[clutchkiller2011]

Still looking for throttle parts.

 

[manchester1]

That throttle looks very similar to the one on my Honda mini trail. Check out some photos. Just a thought.
.

 

[Richard Trotter]

You may need to make the throttle parts or have a machinist look at them. Thanks to RAL for these wonderful drawings.

 

[T's Goat]

You may need to make the throttle parts or have a machinist look at them. Thanks to RAL for these wonderful drawings.
View attachment 243611 View attachment 243612 View attachment 243613

does RAL have more detailed drawings that he will share for other components

 

[Richard Trotter]

There are many drawings, some are high resolution so it is best if I e-mail them to you. What do you need.

 

[clutchkiller2011]

I’m going to bring the drawings and take the parts off one of my other bikes and bring it to a machine shop and see if they can make a few sets.

 

[Sport King Eric]

Thanks Richard for these prints....

 

[Sport King Eric]

I sent the print packet out to one of my suppliers for Quoting this morning.. Have the steel on order. Worst comes to worst I'll use it as a Mastercam class project

 

[Saltspeeder]

There are many drawings, some are high resolution so it is best if I e-mail them to you. What do you need.

Can I get a copy also?
dkelso24@hotmail.com. Thank you