D Dschroeder New Member Aug 16, 2012 #1 Aug 16, 2012 #1 building a mini chopper, looking for a 12" spoke wheel for the front
JamnJM New Member Aug 18, 2012 #2 Aug 18, 2012 #2 I have an extra 14" wheel, brake and axle (hyd forks too) off an Italjet roller, but I'm in OC, Calif.:
I have an extra 14" wheel, brake and axle (hyd forks too) off an Italjet roller, but I'm in OC, Calif.:
70sVintageTrikes New Member Aug 19, 2012 #3 Aug 19, 2012 #3 Dschroeder said: building a mini chopper, looking for a 12" spoke wheel for the front Click to expand... Got any pics of build yet?
Dschroeder said: building a mini chopper, looking for a 12" spoke wheel for the front Click to expand... Got any pics of build yet?
D Dschroeder New Member Aug 19, 2012 #4 Aug 19, 2012 #4 no pics yet...gonna start the chop labor day weekend. I'll start a thread when we get going
D Dschroeder New Member Aug 19, 2012 #5 Aug 19, 2012 #5 JamnJM said: I have an extra 14" wheel, brake and axle (hyd forks too) off an Italjet roller, but I'm in OC, Calif.: Click to expand... what size axle does this run? might be able to use the wheel/brake assembly
JamnJM said: I have an extra 14" wheel, brake and axle (hyd forks too) off an Italjet roller, but I'm in OC, Calif.: Click to expand... what size axle does this run? might be able to use the wheel/brake assembly
JamnJM New Member Aug 21, 2012 #6 Aug 21, 2012 #6 IMO a 15mm axle but I'll dbl check tomorrow. I have converted Rupp 12" wheels that had 15mm axles and bearing to 5/8" before...
IMO a 15mm axle but I'll dbl check tomorrow. I have converted Rupp 12" wheels that had 15mm axles and bearing to 5/8" before...
JamnJM New Member Aug 21, 2012 #8 Aug 21, 2012 #8 I just did a quick measurement without removing the axle nut and it looks like 12mm or near 1/2" axle. What forks are you using? Already drilled? And if so to 5/8" just reduced (bushing) that down to this axle size? Or also buy the forks too and I'll cut off the fork stem tube for ya... :thumbsup:
I just did a quick measurement without removing the axle nut and it looks like 12mm or near 1/2" axle. What forks are you using? Already drilled? And if so to 5/8" just reduced (bushing) that down to this axle size? Or also buy the forks too and I'll cut off the fork stem tube for ya... :thumbsup: