Wanted - Manco wheels

no13

New Member
#1
I'm looking for some of the 5" (with 5/8 bearing) and the 6" ones with 1" hole & 1/4" keyway.

If anyone hears of them or has some, I'd be willing to snag them for a project.

Thanks for looking.

Kelly:eek:ut:
 
#2
I'm looking for some of the 5" (with 5/8 bearing) and the 6" ones with 1" hole & 1/4" keyway.

If anyone hears of them or has some, I'd be willing to snag them for a project.

Thanks for looking.

Kelly:eek:ut:
Your local I would sell you a 5" rear with sprocket for 35.00 you would have to drive to Woods Cross but no shipping.
 

no13

New Member
#3
Cool, I only need one 5" but don't need the sprocket or connector for the sprocket. The 6" ones for the rear end of my project.

Still 35? I can drive to woods cross. It's like 20 min from my place.

Thanks!

Kelly
 
#4
Cool, I only need one 5" but don't need the sprocket or connector for the sprocket. The 6" ones for the rear end of my project.

Still 35? I can drive to woods cross. It's like 20 min from my place.

Thanks!

Kelly
Ill bring it to work tomorrow and take a good look at it. I just noticed it the other day in a box of stuff so I know I have it and where. PM me your number and I will give you a buzz tomorrow.
 

no13

New Member
#5
Great. Those manco wheels (the 5" ones" all have 5/8 bearings) and the ones used for drive wheels have those 6 holes threaded for the sprocket carrier. These 5" ones are going to be for the front so if it has drilled holes or not it don't matter.

Kelly
 
Top