Wanted. Tecumseh front tin.

#7
Do you have the correct bolt for that tin? Seem to recall someone using too long of a bolt and causing cylinder damage or i could be wrong
 

cfh

Well-Known Member
#8
Mass you are correct. if you use too long of a bolt it actually pushing the cylinder wall 1/4-20 style into the cylinder. i've seen it before. it does not completely ruin the motor, but it kind of does...
 

Addicted 2 Minis

Well-Known Member
#12
Have you found one yet?, I know I have at least one I can let go of. There are two different ones for these, full height and half height. Let me know and I'll see what I got.

-A2M
 
Top