What is the correct way to dissemble the front forks/springs on a Heathkit Hilltopper?

#1
There are two sets of bolts that go through the front forks and telescoping springs/tubing's that are under tension at all times. The forks are also connected to the handlebar casting/ steering bearings.
How do you take the front forks apart and reassemble the springs and preload the fork shock absorbing springs?
I do not have the manual and cannot find one online.
 
#2
Remove the bolts, they pass through an eye at the top of each spring. After that the fork tubes and springs will pull out from the bottom. The springs are attached to the lower fork tubes so they will come out together, if they are stuck fast with rust use penetrating oil and movement to free them up.
 
Top