Recent content by foxxinabox

5 x 4.5" is a common trailer tire size. As wildman said, try and find a size comparable to the ones you're taking off. You said you will be replacing the rear shocks but you might also think about running the tires a little low for some extra suspension; most lawn tractor tires run ~14 PSI to...

My Tri-Rod was listed as a TR-2196, but that earns me exactly zero information online. From the info I can find, I would have to believe our models to be STR-381's but, again, with a different model tag I can't be certain, especially since I don't have the original engine. I've been piecing my...

Fantastic find. I wholeheartedly agree with wildman, above, about the one-piece wheels (I have two 6x6 which had them). If you don't want to convert to a 4-lug arrangement, you might find a 3-lug go-kart rim to fit, then put your own tire on. Depending on what route you choose, I've found you...

My work on the Tri-Rod has stalled because, you know, life, but, in the meantime, I've acquired an Alsport UT-10 utility truck in need of an engine. On both machines I've been toying around with the idea of rubber isolators beneath the engine to help dampen the vibration. My question is will the...

Bought this for the wife because she wanted to learn (I'm cool with that). Does what it's supposed to do but is now powered by a Predator engine. I like to have IPL's and manuals for my toys and this one is no different. The only one I can find is for a 593-00, but this one looks a little...

I have a TriRod I'm slowly putting back together. It's similar to those made by Alsport (ie - the Tri-Sport).

So, I had a week off work for once and what did I get done on the TriRod? (Hint: I'm married.) If you said "Not a Thing" you'd be correct. We're not going to discuss the honey-do list.... :rolleyes: Anyway, some progress on the rear end tonight. I ended up using every single cut-off wheel I...

So, small update here. I got the TriRod apart and pressure washed. Next step it to sand(blast) and paint / powdercoat the frame. In the meantime, since being a dad is my other duty, I've messed around with the model decal on the back of the machine. It's not 100% correct, since I don't know what...

I got this frame for my boys but, as I look at it, this might be more here than I want to mess with at the moment. My question is: is this anything worthwhile (rare, special, etc) that I really should be worried about before/if I hack it up? The handlebars have been bent and poorly welded, one...

Epiphany. I may look at mounting the calipers and rotors outboard of the A-arms, like in a traditional vehicle. The only reason I was against this in the beginning was that I was hoping to retain the 8" rims for off-road use (if I wanted to swap a pair from one of my 6x6). Seems like there would...

Well, setback. The good folks at GoPowerSports were kind enough to send me photos and sizes of the small calipers used on the Chinese quads, go-karts, etc. They would work and fit if I was going to keep the suspension at an off-road level (the A-arms at a slightly negative angle). If I'm hoping...

Considered, yes (have been looking into them for another project) but am trying to keep costs low and use what I have. The biggest problem with my setup is more the issue of space. Sure, the frame can be cut and rewelded but, then, is it really the same TriRod? (Philosophical argument) I'll take...

Sorry for the confusion. The flanges are welded to the axles from the diff - each side lopped off about 6" from the diff housing itself.

This is a possibility, since I have to rebuild my jackshaft assembly anyway. I was wondering if something like this would work for a parking brake. Nevertheless, I will have to look into it further; since a PO welded the drive flanges onto the differential, I haven't looked - and am concerned -...

This has been a thought and my only problem with this is reproducibility. To do this properly, the rotors would need to be taken to a machine shop and turned down or else you might get vibration at higher speeds. Then it also comes down to being able to find a replacement for the rotors when the...