Triley41395's latest activity
-
Triley41395 replied to the thread Super Bronc Value??.I absolutely agree it depends on lots of different factors, living in central Ohio I'd pay more for a taco than I would a rupp because I... -
Project so far. H50 motor is in place. New paint, tires/bearings, and rear sprocket…
-
Triley41395 replied to the thread California members best stock up on Predators/Hondas/Etc..Bought one for my son last Christmas and it was 135.00 shipped to my house. That's the only new one I've purchased. Don't know the...
-
Triley41395 replied to the thread Clutch chain.For the bushing I think I'm going to install a thick felt washed against the bushing and soak it in oil so hopefully the clutch bushing...
-
Triley41395 replied to the thread Help my Alexander Reynolds.BMI is less than an hour north of Dayton.
-
Triley41395 replied to the thread OldMiniBikes.com User Map.The map is no more,you could add your location here but there is no map. I live near Dayton Ohio for instance.
-
Triley41395 replied to the thread Need help with identification...I think you'll have a hard time staying in that budget with powder coating, at the bare minimum I would have it sand blasted. It's my...
-
Triley41395 replied to the thread Need help with identification...First thing I would do is power wash the whole thing, then put penatrating oil on every part. Wait a couple days and put more on,then...
-
Triley41395 replied to the thread Is this a 4or5hp slanted intake.Thank you sir, that was quick
-
I just got this today, I bought it because it looks like a tecumseh intake for a rupp or speedway I just don't know the difference...
-
-
Triley41395 replied to the thread New here, right forum??.I'm pretty new at this but I'm thinking that the throttle you have on there can be made to work, if it were in front of me I would be...
-
Triley41395 replied to the thread Anyone recognize this frame.Yep it looks the same, 3 holes in the front seat mount and I in the rear.
-
Triley41395 replied to the thread Anyone recognize this frame.Looks right, if it had fenders I would probably have bought it. Thanks
-
Just wanted to know what type of frame this is. I looked through a bunch of pictures but didn't see anything with these handlebars.
-
-
Triley41395 replied to the thread Any ideas?.They are both briggs. There is a forum for briggs with plenty of knowledgeable people there.
