How wide is the frame on a 1970 taco T-100

[valley boy]

How wide is the frame gap on a 1970 taco super T-100 wide frame model , where the seat fits between the frame so I can buy a U shape bending die. and seat . Also is the tubing 1 inch od. The astro wheel size is it 6 inch dia. and 4 inch wide bead to bead or more ? I thought I would use a 20 year old 8 hp coleman generator motor , its ilike new and has that square look to it . Still may buy a T -100 or frame if some one wants to sell one . In tampa florida . Thanks ...

 

[creia]

Better check out the PTO end of the crankshaft. Most generator engines have a tapered crank end- no good for a clutch install. You would have to replace the crank.
Michael

 

[Broke Joke]

6 1/4” inside to inside. Frame is 1” and the fork tops are 7/8” Fork bottoms are 1”

 

[valley boy]

Thanks for the info. all . better than u-tube . from valley boy .