jackshaft gear ratio

#1
can anyone tell me the best all-around gear ratio for a jackshaft-- low-end and top-end speed? I have a Briggs and Stratton 5 hp 12 tooth clutch and a 60tooth gear on the rear wheel. Thanks in advance
 
#2
60/12=5.0 final ratio. I always liked 6.50 on minibikes but it depends on your engine,tire diameter and stall speed of your clutch. The nice thing about jack shafts is that you can get a lower gear ratio with out running a huge rear sprocket that might drag on the ground.
 
Top