No Mini Work today, But...

[dobber]

Well, I wanted to share some of my work of the day even though it is not a mini. I put the cab off of my 1960 Ford F250 onto the chassis of a 1974 Ford LTD. Now she is only 8 inches off the ground, and will go lower with new tires.

 

[Yellowhand]

Geez...that shop has so much space you had to put up partitions...mine is so small I can bend over and touch my nose to one wall while rubbing my ass against the other.

Nice project...all the trucks around here need a stepladder to enter.

 

[dobber]

Ya, we got a lot of thoughs here to. If you look at the pictures, you can see my buddys Stepside Chevy that has 18 inches of lift. It is so tall it has to have cross over steering, and we have to take off the 44's and put on little skinnys to fit it in the shop. There is no less then 35 cars in there, and a bunch of other crap. It is a old Chicken Farm that was converted, but it is all for our friends.

Kelly

 

[65ShelbyClone]

What did the LTD chassis have in it? A 429?

 

[dobber]

no it has a 351m with a c6.

Kelly

 

[65ShelbyClone]

Oh, that's too bad. :wink: At least the 335 series driveline would still fit a 385 series engine if you decided to swap. :biggrin:

Cool project, BTW. :thumbsup: