looking for a tecumseh hssk50 for my uncles snowthrower hes got a bad engine block i can move the crank up and down on the flywheel side about a quarter inch each way. any help is much appreciated thanks! austin,
the crank on the old one is 1 inch and its got the auxilary drive off the cam im having problems finding them would a hs50 block work dose anyone know? i almostt think the only differene is the auxilary drive cam and the crank case but hes got a good cam and crank case
what if i found and engine like a clone with a 3/4 crank but i put a different pully on it? anyone no of any websites where i can look through are the different choice's of engine to pick from?
HS50 did come in 1 inch Bore, I seen them before and passed on one this summer of a chipper. Look at small engine warehouse. They have some newer Tecumseh flat head HSSK engines that might work.
HS50 did come in 1 inch Bore, I seen them before and passed on one this summer of a chipper. Look at small engine warehouse. They have some newer Tecumseh flat head HSSK engines that might work.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
