Tecumseh Fuel Inlet

[minimotor]

Does anyone have a line on a new fuel inlet for a Tecumseh H35? This one is cracked to hell. I was going to JB Weld it up. Help!!

:helpsmilie:

 

[GTO]

Don't JB it.

A good lawnmower shop or on line. :wink:

 

[delray]

are the threads still in the tank? is the tank a steel tank? if so can you drill and tap out the old threads?

 

[minimotor]

are the threads still in the tank? is the tank a steel tank? if so can you drill and tap out the old threads?

This goes on the carb not the tank. The fitting is plastic and presses on a spline tube coming off the carb.

 

[delray]

ok:thumbsup:you should able to drill out the plastic. just be careful. buy a new plastic elbow and press it back in. jb should still work. just make sure you go around the crack area good and let it dry for a day or so at room temp.:thumbsup:

 

[delray]

did you fix it?:hammer:

 

[chubzy]

I need a list of all old mini bikes that has a tank on the frame...