I found this Elburro frame and fork on ebay in a neighboring city. I had to go with a live axle in the rear. It uses 2 22x11x8" ATV tires. The engine is a Tecumseh 8hp with a comet TAV 2. I recently installed a Mikuni 26mm slide carb as the oem Carb was rich of idle and would not tune out at all! (Brand new carb too) The mikuni bolted right on and works great. A tad bit rich but now I can replace the jets easily!! ( I have the needle in the leanest setting) The seat was done by a lady I know and the handlebars are from JC whitney mounted on some 4" tall air manifold blocks I "borrowed" from work. I love this big thing! Pretty rough off road though-no suspension. Great on the back roads!
