Recent content by flamingskull

Can't find the ad but here's one for cops

Ok I know this is electric and not a mini bike but I could not resist posting this 70s fever dream

Chinese made jets are all over the map as far as sizes go.

And if you drill too large just use silver solder to close the hole and redrill.

Colemans with bent forks are $500-600 here.

Rod prolly

If you can't find a jet big enough, drill one out. You can get a cheap wire drill set and go up one size a time until it's good. If you drill it too big, you can silver solder the hole shut an redrill.

I'm gonna replace my crank bolt with correctly sized 12.9 bolt.

Making replacements for some of the cooling lost by removing the stock carb assembly.

Apparently he leaves everything he's ever had listed after it sells. Let me go over there and scope it out.

I got everything torqued. I just need to sort out the air filter and breather. And buy a mini bike.

What state are you in? There's a guy here in Florida who has about a half dozen vintage frames for sale.

I thought it would work just fine as it's the same outlet size as a vm22 and these carbs are typically used on 150cc motors, so I shouldn't be seeing velocity issues running it on a 212.

Getting there.