You have convinced me to go generator and external regulator because of lower output and current control and designed to do that.
I was all set to go down the wrong path, thanks.
I'll start trying to find the generator and external regulator. Any suggestions about the generator to point...
What nomenclature Delco generator and mechanical regulator would you suggest? I'll do some research and see what I can find.
How I got that rpm is from the 10si output performance curves. The 10si at about 1300 rpm produces about 8 amps. I chose the speed based on what I wanted the 10si to...
I'm doing a GC 190 to turn an auto alternator GM 10si to charge an RV battery and provide DC power when out boon docking. I will be running the rpm on the GC 190 about 1600 rpm so the alternator does not charge the battery too fast (10 amps) and runs about 1300 rpm. (engine pulley 2.0...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.