broken clutch

[gunnar101]

well i was try to take off the bolt on the clutch and BOOM it broke:doah: me and small things dont get along

 

[black_ice]

if it didnt break all the way off flush with the crank and you can grab it with some visegrips i would get a torch and turn that crank cherry red and back it out but the down side is you might have to replace the crank seal cuz will BBQ it.
dont feal bad about the bolt thats why i dont like aluminum that much just about every time i tighten a bolt bye bye threads lol!

 

[Tom S.]

...i would get a torch and turn that crank cherry red...

......

 

[GTO]

There is a bit/ tool for removing broken bolts, go to a auto parts store and ask. :thumbsup: You could also drill and tap it out but try the tool.

 

[DavenSeattle]

They are called Easy-Outs. Tool supply store will have a set. Mine are from Snap On and have lasted for years. You will have to drill the bolt to fit the proper sized Easy-Out bit.

 

[gunnar101]

yea this mini is going to be the death of me but what the hell i had a hell of a time doing it:thefinger: