Clutch removal issues

[John ONeal]

I have the 97cc DB engine and need to remove the stock clutch. I have removed the bolt and washer from the end of the engine output shaft, but can`t get the clutch to move outward and off. I am sure there is a recommended method to this removal process. How about a little insight from you guys with experience.

 

[Strigoi]

is there a set screw holding the clutch on as well?

if there isn't, you may have to get a puller to get it to come off.

 

[John ONeal]

Thanks for the ideas. It was just tight on the shaft. A tapered wedge in behind the clutch and a couple of sharp raps it popped right off. Thanks again for the help.