Cure for engine vibration

[Mariah]

It might not look pretty but it sure solved the problem...

 

[Mariah]

 

[Havasu Dave]

I like it! Very clean look, and you can adjust preload. Nice paint too.

 

[Mariah]

Thanks Dave, antique Rambler station wagon blue...looks a lot better than it sounds!

 

[Davis]

Nice and clean.

 

[DaddyJohn]

My old Buell used Heim joint engine isolator braces like that.

Front

Top

 

[SCooke123]

Nice fix!

 

[RobertC]

I like it.

You sure do nice work Mariah...!

 

[ole4]

My atlas came from the factory with a head steady. There is a 1/8 flat steel piece welded to the frame and has a hole then a l ahapped bracket thet mounts to that frame piece and has two headbolts holding it. you can see it in this pic going from the two back headbolts going up to frame.

 

[delray]

that seem to be a big problem on the older super bronc's. they fix that problem on the newer models with this type of bracket.

 

[Mariah]

Delray that's what was on this engine originally and the bottom part split through the bend from vibration so I thought a fresh approach to this support might work out better.