DB30 Stock Clutch Retaining Bolt: 5/16-24 y/n?

[Vintabilly_NS]

Hi everyone;

I'm trying to find out the size of the bolt to keep the stock clutch on the shaft of a stock 2.8hp 97cc Doodlebug. My lad lost his in the grass when his dad didn't threadlock it in place.

Is it a 5/16"-24 x 3/4" bolt plus the washer and lock washer as OldMiniBikes suggests?

I can't find a definitive answer and I've searched the forums. I'm confused which bolt is for the stock 97cc and which bolt is for the 212cc predator mod.

Thanks everyone.

 

[Docdc]

I can't help with the size at the moment but I may have one laying around. If you can't find the proper bolt, PM me and I'll send it out to you.

Doc

 

[Vintabilly_NS]

Hey Doc, thank you...but..


ANSWER: The stock DB30 97cc 2.8hp 16mm clutch retaining bolt is an M8 x (about) 30mm.

I took the first M8 bolt, lock washer and washer from my trusty $5 bolt/nut kit from Princess Auto (our Northern Tool). Voila.

~Rex.