Hi,
Was hoping someone has some experience with these old brake light switches (see pic). These are the original that were used on the bike with optional light kit.
The switch is very simple design. Problem I'm having is when I clamp the brake cable to handle bar it puts to much pressure on switch and stays actuated (closed). Tried all adjustments with cable tension, etc. I got it to where it works great UNclamped but as soon as cable is clamped switch stays on.
Are these switches just a poor design and crap or is there a trick to installing them?
Thanks in advance
Was hoping someone has some experience with these old brake light switches (see pic). These are the original that were used on the bike with optional light kit.
The switch is very simple design. Problem I'm having is when I clamp the brake cable to handle bar it puts to much pressure on switch and stays actuated (closed). Tried all adjustments with cable tension, etc. I got it to where it works great UNclamped but as soon as cable is clamped switch stays on.
Are these switches just a poor design and crap or is there a trick to installing them?
Thanks in advance
Attachments
-
15.8 KB Views: 19