Time to assemble a Mini Bike Scooter . That breath was tricky to weld , brass the steel . That shouldn’t be a problem at all , but being zink/eradite plated. Made it exiting to weld , I dis surface condition the steel . Didn’t want grind in the steel to much ether . Started sputtering spitting RUTROOOOO . Just went slower let stinger clean the weld a bit as I went . Spitting enough to have silicone bronze stuck on tungsten when finished. but it solid perimeter weld . polished the 90 taped it off , then shot it with hammer wright silver .
Attachments
-
1.9 MB Views: 33
-
1,012.6 KB Views: 29
-
1.8 MB Views: 29
-
2.2 MB Views: 32
-
965.9 KB Views: 32