Manco 4" wheel spacer/sprocket question.

gumpit · Dec 2, 2016

Do the 4" wheels use a spacer similar to the 5" and 6" ones for the sprocket? Or just stand offs?
Does anyone have a spacer for a 4" wheel or know the length of the spacer? Does anyone have a sprocket for a 4" wheel or know where to get one?

Not so mini bike · Dec 2, 2016

gumpit said:

They never used the 4" Manco as a drive wheel so they don't have a sprocket. Karen drilled and taped a wheel half I believe.

james ackerman · Dec 2, 2016

I think there are mancos with a key way slot in them that would slide on a axle but I'm not positive that they were made like that on the 4 inch rims. This is on ebay markus is selling,it may work for you if you get one side drilled and tapped. Manco, trail horse, Arctic cat? wheel sprocket and spacer vintage mini bike kart | eBay

gumpit · Dec 2, 2016

Are the 4" holes the same spacing as the 5" and 6"? Will that sprocket work?

Not so mini bike · Dec 2, 2016

5 and 6 is the same I believe. Not sure about 4". I don't own one. Lol

gumpit · Dec 2, 2016

What is the distance from the center of one hole to the next on a 5" or 6"?

james ackerman · Dec 2, 2016

I would have to measure a sprocket once I got home. I'm I'm p.a. for the weekend.

gumpit · Dec 3, 2016

I bought the one in the link anyway... Can always add to my parts bin if its wrong.lol he daid it was 3.25" in the description. I"ll make it work...lol

SimpleTom · Dec 4, 2016

I used the standard Manco spacer on a 4 inch wheel. But I had to grind down the edges for it to fit inside the wheel lip.